Scope of supply

I. "Warm contour" package
II. Turnkey package

Site survey to select the most appropriate foundation type

Geological survey to determine ground structure and load resistance, ground water depth. Further, it reduces the cost of accurate foundation elevation survey for the customer.

Design and customisation. Architectural solutions, interior design, reinforced concrete structures, metal structures, wooden structures, HVAC, indoor water supply and drainage, outdoor water supply and drainage, indoor electrical equipment, outdoor electrical equipment

Design package: AS – architectural solutions, ID – interior design, RCS – reinforced concrete structures, MS – metal structures, WS – wooden structures, InEE/OutEE – indoor/outdoor lighting, OutWSD – outdoor water supply and drainage, HVAC – heating, ventilation and air conditioning, InWSD – indoor water supply and drainage

Foundation: 350mm solid thermal insulated Swedish slab

  • Tamped sand bed 500mm
  • Waterproofing layer
  • Foundation utilities: sewerage, heating, water supply, power mains
  • Heat insuation XPS Carbon ECO &mdas; 200mm on perimiter, 100mm on the bottom
  • Heat-reflective layer
  • Cast-in-situ floor base — 200mm, Ø10 bars, double grid 200х200, М300 concrete on a gravel base with hydronic radiant floor pipelines
  • Solid beams (slots) 250x300mm for partitions
  • Top layer grinding to the floor topping quality

 

Wall set

  • External walls: 350mm three-layer energy efficient insulated reinforced concrete sandwich panels (110mm inner layer, 190mm insulation, 50mm outer layer),  delivered and installed with a crane (including inner layer reinforcement and joint grouting, outer layer waterproofing). The wall panels are ready for exterior or interior finish (with embedded electric cable conduits
  • External walls:  300mm tongue-and-groove silicate block and 120mm filler  walls (partitions) 2.7m high

 

Option:  Internal walls made of claydite concrete instead of blocks

Load bearing walls of 160mm reinforced concrete panels, filler walls of 100-120mm claydite panels.   The expanded clay aggregate is intended to reduce weight and signigicantly improve noise insulation properties of concrete. The panels contain concealed utility routes  cable conduits. Surface class  for finish. Unlike blocks, no wet installation or finish is required. Installation within 1 day.  

Ventilation

Natural draught ventilation shafts of light concrete blocks. Inversion valves in window blocks.

Ceiling

Ground floor ceiling of biotreated dressed wooden beams 200x50

200mm basalt rock wool insulation (ceiling, not roof)

Ceiling boarding with plasterboard

Option: Precast or preassembled reinforced concrete ceiling with cast-in-situ gird. 2500$

Energy efficient windows

Triple-pane windows REHAU profiles with energy saving glass, sills, external sills. Velux dormer windows according to the design.

Roof

Reinforced frame of sized dry dressed wood: 150х150 head plates, 200х50 trusses, 200mm heat insulation, vapour barrier, Optima Modern 0.45 PE profiled metal sheets on a counterpattern of wooden bars 25x100

Steel front door

100mm door sheet
High density basalt rock wool insulation 
Burglar resistance class 4
1.5mm steel sheet, 2 locks

Porch

Cast-in-situ porches in number and size according to the design

Exterior finish

Plastered wall panel joints/seams. Painted facades with colour and texture discussed individually.

Site survey to select the most appropriate foundation type

Geological survey to determine ground structure and load resistance, ground water depth. Further, it reduces the cost of accurate foundation elevation survey for the customer.

Design and customisation. Architectural solutions, interior design, reinforced concrete structures, metal structures, wooden structures, HVAC, indoor water supply and drainage, outdoor water supply and drainage, indoor electrical equipment, outdoor electrical equipment

Design package: AS – architectural solutions, ID – interior design, RCS – reinforced concrete structures, MS – metal structures, WS – wooden structures, InEE/OutEE – indoor/outdoor lighting, OutWSD – outdoor water supply and drainage, HVAC – heating, ventilation and air conditioning, InWSD – indoor water supply and drainage

Foundation: 350mm solid thermal insulated Swedish slab

  • Tamped sand bed 500mm
  • Waterproofing layer
  • Foundation utilities: sewerage, heating, water supply, power mains
  • Heat insuation XPS Carbon ECO &mdas; 200mm on perimiter, 100mm on the bottom
  • Heat-reflective layer
  • Cast-in-situ floor base — 200mm, Ø10 bars, double grid 200х200, М300 concrete on a gravel base with hydronic radiant floor pipelines
  • Solid beams (slots) 250x300mm for partitions
  • Top layer grinding to the floor topping quality

Wall set

  • External walls: 350mm three-layer energy efficient insulated reinforced concrete sandwich panels (110mm inner layer, 190mm insulation, 50mm outer layer),  delivered and installed with a crane (including inner layer reinforcement and joint grouting, outer layer waterproofing). The wall panels are ready for exterior or interior finish (with embedded electric cable conduits
  • External walls:  300mm tongue-and-groove silicate block and 120mm filler  walls (partitions) 2.7m high

 

Option:  Internal walls made of claydite concrete instead of blocks

Load bearing walls of 160mm reinforced concrete panels, filler walls of 100-120mm claydite panels.   The expanded clay aggregate is intended to reduce weight and signigicantly improve noise insulation properties of concrete. The panels contain concealed utility routes  cable conduits. Surface class  for finish. Unlike blocks, no wet installation or finish is required. Installation within 1 day.  

Ventilation

Natural draught ventilation shafts of light concrete blocks. Inversion valves in window blocks.

Ceiling

Ground floor ceiling of biotreated dressed wooden beams 200x50

200mm basalt rock wool insulation (ceiling, not roof)

Ceiling boarding with plasterboard

Option: Precast or preassembled reinforced concrete ceiling with cast-in-situ gird. 2500$

Energy efficient windows

Triple-pane windows REHAU profiles with energy saving glass, sills, external sills. Velux dormer windows according to the design.

Roof

Reinforced frame of sized dry dressed wood: 150х150 head plates, 200х50 trusses, 200mm heat insulation, vapour barrier, Optima Modern 0.45 PE profiled metal sheets on a counterpattern of wooden bars 25x100

Steel front door

100mm door sheet
High density basalt rock wool insulation 
Burglar resistance class 4
1.5mm steel sheet, 2 locks

Porch

Cast-in-situ porches in number and size according to the design

Exterior finish

Plastered wall panel joints/seams. Painted facades with colour and texture discussed individually.

Water supply, sewerage, heating

Full scope of installation works related to water supply, heating (ground level hydronic radiant floor, first-floor radiators) and sewerage piping arrangement to the outlets. Installation of radiators, hydronic radiant floor, pumps, boilers BOSCH. Setting up of metering instruments. (Materials, equipment, vessels to be confirmed)

Electrics

Concealed cabling with three-wire copper leads in wall-integrated cable conduits. The assumption is — two outlet points, one light switch, and one lighting fixture per room. Sleeve-moulded connections.  Arrangement and connection of metering instruments in wiring closets.

Finish coating

Flooring

Cast-in-situ concrete floor,  ArtBeton decorative coating, finish: Polyline-51 high-duty scratch resistance water based polyurethane varnish to protect the decorative coating against UV effect (discolouration). 100% eco-friendly! 

Wall finish

Decorative wall coating with ArtBeton — TOP !!! Gallery

Ceiling finish

Precise ceiling levelling. — Painting. Stretch ceiling or multilevel plasterboard ceiling on request.

Interior doors

Portas interior doors of PVC based eco-veneered solid pine wood/MDF, colour – walnut, dimensions: 700х2000х36 (materials to be approved).

Energy efficient ventilation

Wall-mounted VAKIO Window —  plenum recuperation unit in each room creates comfortable ambient, drawing vital oxygen into the house and carbon dioxide, out.

VAKIO Window is a 4-in-1 device capable of operating in a power saving ventinlation mode, a full plenum mode, an exhaust mode, or a passive valve mode. The device features CO2 filters, air sanitation filters, etc.

Centralised recuperation system is available on request (see ventilation.)